24/7 emergency dispatch for Lake Stevens, WA and nearby towns(360) 371-6092
PEX supply lines run through open wall studs during a repipe

Repiping in Lake Stevens, WA

Repeated pinhole leaks, rusty water and low pressure are signs that supply pipes are wearing out. We replace failing lines with PEX or copper, one section or the whole house.

When repiping makes sense

A single leak does not mean repiping. A pinhole leak in a copper line can be repaired. When pinholes keep appearing in different spots, the pipe is failing from the inside and repairs will not keep up. Rusty water at every tap and a long-term drop in pressure point the same way.

Repiping replaces the supply lines that bring water to fixtures. It does not usually include drains. We start with an assessment to see whether a partial repipe on one trouble area is enough or a whole-house job is warranted.

Signs your supply pipes are wearing out

  • Repeated pinhole leaks in copper or galvanized lines.
  • Rust-colored water, especially first thing in the morning.
  • Low pressure at several fixtures, even with a good main.
  • Visible corrosion on pipes in the crawlspace or basement.
  • Pipes of a known problem material such as galvanized steel or polybutylene.

Pipe materials compared

We install the material that fits your house and budget.

MaterialStrengthsTrade-offs
PEXFlexible, fast to install, resists freezing damage better than rigid pipeShould be protected from sunlight
CopperLong track record and durableHigher material cost, can pinhole in some water
CPVCInexpensive for hot and cold linesMore brittle, can crack with age

For a repipe that comes after a leak, our leak detection service can confirm what is failing before you commit.

Galvanized pipe, low pressure and water service lines

Galvanized steel was common in homes decades ago. Zinc coating wears away, and the inside of the pipe fills with rust and scale. Pressure drops, water turns brown and joints begin to leak. If your house has galvanized lines, replacement is a matter of when, not if.

The water service line, which runs from the meter to the house, is separate from the pipes inside. A leak or heavy corrosion in that line can cause low pressure and high bills. We locate the problem and discuss replacement options.

Local note

Pipe age and plumbing in Lake Stevens

Lake Stevens incorporated in 1960 and grew mostly after 2000. A house from the post-2000 growth years likely has PEX or copper supply lines, and a repipe there is rare. Homes from the commuter decades of the 1960s and 1970s are more likely to have copper or older galvanized lines that are nearing the end of their service life.

Snohomish County PUD reports average total hardness of 73 ppm for the Lake Stevens system, with a range of 9 to 89. Ask the PUD for its latest report if you want exact numbers for your tap.

Pinhole leaks again? Call and we will assess whether repiping is the answer.

Call (360) 371-6092

How a repipe is done

  1. Plan the routeWe map where each fixture sits and choose the shortest path.
  2. Open small access holesWe cut limited openings in drywall and run new lines through them.
  3. Install and testNew lines are connected and pressure tested before they are covered.
  4. Patch and restoreWe close access holes and leave the house ready for finish repairs.

Code and standards for a repipe

A repipe follows the Uniform Plumbing Code (UPC), adopted in Washington with state amendments under WAC 51-56, which governs approved pipe materials, supports and pressure testing. Whole-house repipes are commonly permitted and inspected. Ask the City of Lake Stevens building department what yours needs, and verify any plumber on the Department of Labor and Industries Verify page.

Repipe pricing factors

You get a written price before any walls are opened.

House sizeMore fixtures and longer runs mean more pipe and time.
MaterialPEX is generally lower in cost than copper.
AccessOpen crawlspaces speed work, and finished walls add patching.
ScopeA partial repipe on one wing costs less than a whole house.

A repipe usually takes a few days for a typical house. We keep you updated on shutoff times.

Questions we hear

How long does repiping take?

A typical whole-house repipe takes several days, depending on size and access. We tell you the water shutoff windows in advance.

Do I have to leave the house during a repipe?

Usually not, though water will be off for part of each day.

Will repiping damage my walls?

We cut small access holes and patch them. Finish painting is separate.

Is PEX or copper better?

Both work. PEX is flexible and quicker to install. Copper is rigid and has a long track record.

Do I need a permit to repipe?

Permit rules vary, so ask the City of Lake Stevens building department what applies. We explain the scope so you can ask precisely.

Wondering if your pipes are due for replacement? Call and ask.

Call (360) 371-6092

Replace failing pipes before they flood

Call to schedule a repiping assessment and get a clear price before any work starts.

Call (360) 371-6092
Coverage area

Where we work around Lake Stevens

Dispatch runs from Lake Stevens across Snohomish County, including Marysville, Snohomish, Granite Falls and Monroe.

Call (360) 371-6092