Burst pipe: do these things first
A burst pipe is an emergency at any hour. Our 24/7 line answers every call. These steps reduce damage while you wait.
- Shut off the main water valve. It is usually near the water heater, in the crawlspace or at the meter. Turn it fully clockwise.
- Cut power to wet areas. Turn off the breakers for rooms with water. Do not touch outlets or switches with wet hands.
- Open faucets. Open the lowest faucet to drain the lines and relieve pressure.
- Move belongings. Lift rugs, electronics and valuables out of the water path.
- Call us. Describe where the water is and what you see.
What causes pipes to burst
Freezing is the best-known cause. Water expands as it freezes and splits pipe walls, often in crawlspaces, exterior walls and unheated garages. Corrosion, high water pressure and age are the other common reasons. Many bursts happen when thawing releases pressure at a split.
Cold snaps do reach Western Washington and Snohomish County. Insulating exposed pipes, disconnecting hoses and knowing where the main shutoff sits protect your home before the next cold spell.
Repair methods by pipe type
| Pipe | Typical repair | Notes |
|---|---|---|
| PEX | Cut out the split, install a coupling | Fast, and PEX tolerates minor freezing better than rigid pipe |
| Copper | Cut and sweat a new section or use a press coupling | Check nearby sections for damage |
| Galvanized | Replace the section, often with PEX | Often a sign of wider corrosion |
| CPVC | Replace the cracked section | Brittle with age |
If one burst reveals more failing pipe, our repiping page explains replacing whole runs.
Burst pipes in Lake Stevens
Snohomish County Emergency Management publishes winter weather notices for the county and reminds residents to protect pipes from cold snaps. Lake Stevens is in that county, so those notices apply here. Watch the forecast for several nights below freezing before you leave a house empty.
Homes built after 2000 commonly have PEX supply lines, which tolerate freezing better than rigid pipe. Older homes near the lake and downtown may have copper or galvanized runs in crawlspaces that are more prone to splitting. Know where your main shutoff is before you need it.
Water still running? Shut off the main and call the 24/7 line.
Call (360) 371-6092Prevent the next burst
A few steps cut the risk before winter.
- Insulate exposed pipes in crawlspaces, garages and exterior walls.
- Disconnect garden hoses and shut off outdoor spigots before a freeze.
- Let faucets drip on the coldest nights where pipes run along outside walls.
- Learn the main shutoff location and test that it turns.
- Keep the heat on at 55 degrees or above if you travel.
Code and standards for the repair
Replacing a burst section of pipe follows the Uniform Plumbing Code (UPC), as adopted in Washington with state amendments in WAC 51-56, which governs approved materials and joints. Document the damage with photos before cleanup, since your insurer may ask for them.
What changes the price
You hear the price before work starts.
Insurance often covers sudden burst-pipe damage. Take photos, keep receipts and call your carrier right away. We do not handle water damage drying or restoration, but we can point you to the next step.
Questions we hear
Do you handle burst pipes at night or on weekends in Lake Stevens?
Yes. Our line is open 24/7. Shut off the main water valve first, then call us.
How do I find my main shutoff?
Look near where the water line enters the house, near the water heater, in a crawlspace or at the meter box in the yard.
Can a frozen pipe be thawed safely?
Sometimes. If a pipe has not burst, warm the area slowly. Never use an open flame. Call us if you are unsure.
Will insurance cover a burst pipe?
Many policies cover sudden water damage. Check with your insurer and document everything.
Do you repair PEX and copper?
Yes. We repair both and tell you if nearby pipe looks weak.
Pipe split or leaking behind a wall? Call and we will send a plumber.
Call (360) 371-6092
